Submitted by: informed on 7/29/2013
Submitted by: Anonymous on 7/27/2013
Overall, I think it was a very good purchase and I would purchase one again if I had to drive a car of that type again. Very happy with it.
Submitted by: Anonymous on 6/15/2012
Submitted by: Anonymous on 3/8/2012
This was installed by my dealer and it worked fine for the first two times. But then I experienced the same complaint as others. The roller separated from the crossbar on the right side! Thank goodness it happened the first time at home and I had the Allen wrenches. I tightened the screw and it didn't happen again. All was fine for another two trips and then the roller separated on the left side, this time because the crossbars wouldn't slide out. Again I was at home and I tightened the screw but that isn't the problem. It's that the crossbar just won't slide through easily. I am short (5'1") and have a small SUV so I have to use a steps tool ALL the time. And I got this so I wouldn't have to have help loading and unloading my kayak. Now I keep my Allen wrenches with me at all times. I SORELY regret this purchase and will ask my dealer and Yakima to help me. I am just wondering what the NEXT problem will be!
(P.S. Glad I read about not using WD-40. I was going to do that when I take the yak out this weekend.)
Submitted by: Anonymous on 9/19/2011
To stay attached to the rest of the assembly, the roller bar depends on good contact with the end of a small bolt which can come loose very easily. This means you have to tighten this bolt frequently. I am short which means I have to carry a small step ladder with me in order to reach the bolt. I also have to use some sort of lubricant to get the roller to slide easily toward the back of the car.
The very small bolt that holds the roller bar assembly to the bars that run back to front on the car come loose often. Needs a fix. The roller bar assembly and the front-to-back rods should be permanently attached!
Today I had a new problem. I didn't realize that the red levers could come completely off the bolt they are connected to.
Come on Yakima! You can do better than that! A friend of mine just has saddles and uses a piece of rug to slide her kayak to the top of the car. Maybe I should just take the whole showboat off and return it to the dealer.
Submitted by: Anonymous on 6/28/2009
I installed everything myself and it was painless. You have to measure the distance between the support bars and make sure you have the correct distance between the extension bars. There's a handy ruler printed on the outside of the box but I opted for a tape measure. I practiced taking the rack system off and on a few times to get the feel for it and I'm amazed at how simple it is.
The extension bars and the Showboat roller work very well and I know how to make adjustments if the bars feel hard to pull. It's mainly a matter of alignment and how tightly the brackets for the extension bars are set and does require a little patience in finding the right tightness.
The biggest problem I had was with my fat canoe. When loaded over the center of the vehicle it sits on the towers so I had to offset it over the driver side a little in order to use the gunwale brackets. I have 44 inch bars and it is crowed between the rack towers and the brackets for the gunwale kit and the showboat system.
Loading the canoe if exceptionally easy. Just follow the directions of setting one end of the canoe on the roller (fully extended and locked) and pick up the back of the canoe and push it on while keeping the angle above the racks until it's in a position to be on the racks where you want it to be. It will hang on the brackets otherwise. Unloading the canoe is equally simple. I just pull it back and stay underneath the canoe until the yoke is on my shoulders and I back up and wander off to the water in a portage carry.
I am very pleased with this product so far and I find it a very clever solution for loading a canoe by yourself.
Submitted by: Anonymous on 6/25/2008
Yakima was very nice and called the next store I decided to go to, to have the Showboat installed correctly; Yakima even made a deal with the other store so I received a 25% discount on the Showboat and Crossbars since I had such a bad experience at the 1st store. Unfortunately, after 2 hours of installation and much hard work by the owner and his assistant at the 2nd store, I'm experiencing the same trouble I did with the Showboat and crossbars; Showboat (roller part) difficult to pull out and it was like this after the 2nd store installed both pieces, which got me concerned, but after they worked for 2 hours installing it and also moved my Yakima roof racks to a different position, thinking that this would correct the problem that the 1st store did not do, I felt guilty not purchasing the Showboat so I brought it and paid over $100.00 in addition to giving the owner a tip of $30.00 since installation was free!
This past Sunday, when I went to load my kayak after paddling, I thought I was going to yank my back out trying to pull the Showboat (roller part)away from the crossbars and guess what happened, the Showboat disconnected from the crossbars. For those of you familiar with Yakima's Showboat, yes, the red clamps were opened as they are supposed to be when pulling the roller part away from the crossbars to load the kayak. There was a man who came to help me place the Showboat back onto the crossbars and he said, as I knew, the screw that holds the clamp on the Showboat, was as tight as it could possibly be; it couldn't be tightened any more, so this would not solve the roller from disconnecting from the crossbars.
I called Yakima again and reported this 2nd same problem. The Yakima dealer wasn't as nice the 2nd time around as he was when I initially called him. He told me he hasn't gotten any other complaints like mine from others who have purchased the Yakima Showboat, but did tell me as I tried to troubleshoot with him, that if the Crossbars are damaged (dented in any way) that this could be why the roller part is so difficult to pull out from the crossbars. I then checked my crossbars and it does look like they are a bit dented toward the front so I will show this to the 2nd store owner tomorrow. I would really appreciate hearing from anyone else who purchased the Yakima Showboat and Crossbars to hear if you have or had the same difficulty that I've experienced twice from 2 different stores.
If the Showboat would operate with easier pull out from the crossbars and not disconnect from the crossbars, this piece of equipment would be a gem for any Subaru Forester or higher vehicle.