B523 - Yukatat

by  Stearns

This Product Has Been Discontinued

B523 - Yukatat Description

The B523 - Yukatat is a kayak brought to you by Stearns. Read B523 - Yukatat reviews or submit your own review to share with the paddling community. Check out a few other kayak recommendations below or explore all kayaks to find the perfect one for you!

Stearns
B523 - Yukatat Reviews

Read reviews for the B523 - Yukatat by Stearns as submitted by your fellow paddlers. All of the reviews are created and written by paddlers like you, so be sure to submit your own review and be part of the community!

Embed these reviews on your site

1

I purchased two Stearns…

Submitted by: guest-paddler on 7/14/2008
I purchased two Stearns Yakutat kayaks in 2006 for use on vacation. So far I have only them between 8-10 times. Last week, while attempting to assemble one of the kayaks for use on the Swan River in Cape Cod, I broke the slider on the main (forward) sipper which rendered the vessel useless. So far Stearn's has not responded to either of the requests for support that I have made (stearnsrec@stearnsnet.com). I am very disappointed in both the Yakutat product and Stearns' refusal to provide support.
4

Let me first note my…

Submitted by: paddler232065 on 6/4/2007
Let me first note my background: I have no real kayaking experience. I first thought of getting an inflatable kayak back in 2000, after going inner-tubing down the Shenandoah River in Virginia. I greatly enjoyed the experience, but was a little frustrated by the difficulty in actually maneuvering an inner tube on the River. Shortly afterwards, I was at REI with a friend, and noticed an inflatable Kayak on the wall. I'm fairly certain it was a Yukatat, because it was Gold, etc. (The Yukatat is actually a Gold tone, or Amber, not a yellow.) I therefore think this came out well before 2000 (I've seen other earlier dates associated with this elsewhere as well.) Anyway, I thought it would be the perfect answer to someone who enjoyed whitewater floating, but wanted a bit more control. I also realized when younger that inflatable sleds were much better than regular sleds in that they absorbed most of the impact, and figured the same would apply to whitewater kayaking. (Worries of "popping" the kayak were obvious initially, but I then realized that the larger rafts that traditionally do whitewater are also inflatables.) Anyway, I had my eye on the Yukatat since then, but never had the spare cash until recently. However, last week, I was finally able to order one after months of online research, including reviews of this page and the Airframe (advanced elements - AE) kayak.

Bottom line, it appeared that the Yukatat and the AE kaykak were largely identical except for minor features. I chose the Yukatat, despite the criticisms here, because I frankly preferred the look and style -- it just looks nicer to me, more professional, etc.
I had some issues with the delivery -- the valve cover and a seat belt buckle were missing. However, Amazon refunded me $40 for the valve cover alone, and I'm going to try to get more cash for the buckle, which should make it a worthwhile trade-off overall. (I figure I can replace the buckle elsewhere or directly through Stearns.)

On the water (first time yesterday), I noticed the following things: First, my overall experience was pretty nice. It moves fairly slow in standing water, but I got this to float down moving rivers. Once I got to the river, I was surprised how quickly I was moving. Paddling, of course, increased the speed further. As long as I kept alternating sides, as normal in a kayak, I had no trouble keeping a fairly straight course. I also got decent glide for several yards after I stopped paddling, even on standing water. Left to its own devices, the kayak will pretty much drift aimlessly. Maybe a skeg would be helpful for this -- I do know my kayak has a shallow, 1-2 foot long fin in the front that may help produce some stability. However, compared to the tubes and rafts I've experienced in the past, this wasn't a big change. All I really needed to do to keep it straight was an occasional correctional paddle in either side, if I just wanted to drift.
I did notice that the natural tendency is to recline in the chair. However, I'm not sure if this is such a bad thing -- I liked being able to stretch my head back and relax on the stern when I wanted to. For those desiring a more constant upright posture, I would recommend creating some kind of harness that hooks up to the bow D-rings and provides further back support. Another option is to simply stuff clothes, towels, etc. behind the seat in a drybag of some sort. This greatly improves support while also providing storage. (While the storage area under the deck, behind the seat is not huge, is is large enough for a sleeping bag, and/or a few other items.) Again, though, personally, I liked being able to stretch back, and even put my feet on the front deck, and/or dangle my feet in the water, when I felt like taking a break. I could still paddle in this position if I wanted to, especially for steering.
I'm 6'1, 205 lbs, and with my feet in the kayak, they were fairly close together, but I could fully stretch them out with room to spare.

Bottom line, for me: I don't think there's a huge difference between this and the Advanced Elements (Airframe). The Airframe may have a small skeg that helps with tracking somewhat, but they otherwise appear essentially identical. I would recommend you therefore check out the Airframe Reviews, most of which will apply to this boat as well. I'm sure as a softshell, this lags the performance of a hardshell in some respects, and a purist may not be completely satisfied. However, I found this extremely comfortable, due to its inherently cushioned nature, and I definitely enjoyed my paddle. The ease of setup was very nice, and I was able to break it down in about two minutes when my ride back to the car was ready to go.

Let me note a couple things that others may find helpful. While the carry bag that comes with the kayak technically "fits", it requires a bit more effort to fold the boat down perfectly to that point. Also, the bag doesn't have a shoulder strap, so it's more unwieldy than necessary. Finally, the bag doesn't really breathe, which can be problematic with damp items. Here's what I did: I looked for a large "mesh/net sack" type bag that could more easily carry the deflated boat. I found a Boat Cover Holder from K-Mart for $5.00 that was 30 X 34 inches, and the boat fit almost completely into that. I then hooked up the shoulder strap from my suit bag to that bag (it has the adjustable clips on the end), and I had a carry bag that was easier to load, unload, and carry, while letting the vinyl further dry in the process. Dunham's online has a slightly larger (30X36) cover which I may eventually order. I also found a larger mesh/net ball holder at Dunham's which I'm going to try out. (I'm not sure if the netting's strong enough.) Basically, the larger the better, so you can cinch the end and hook up the shoulder carrier on a horizontal axis, distributing the weight better. Anyway, that's my suggestion for the board. Aside from that, I think this is a great first kayak for beginners, in terms of cost, comfort, and fun. You can always get more hard-core and purist with more experience, and I probably will as well. However, for now, I can see myself taking this kayak on all kinds of rivers all over the country. It seems very durable, and seems almost impossible to capsize. While I haven't had any other kayak experience yet, this definitely was easier and more fun to deal with than a canoe. (I also seemed to move more quickly than the canoes I encountered.)
I'm looking forward to taking this thing on a 2-3 day trip down some rivers, with my sleeping bag and tent strapped on the kayak. Seems a lot more fun and easy than hiking.

2

I also have a B523 – Yukatat…

Submitted by: guest-paddler on 1/12/2006
I also have a B523 – Yukatat and as stated in the previous review, it pulls to one side so badly I’ve only had it on the water once and was so disappointed I never took it out again. This boat needs a skeg in the worst way. I also have a IK-116 from Stearns that does have a skeg and I’ve never had any complaints. After a little initial zig-zag when you first start off but, after you have a bit of forward motion, the skeg takes over and you track very well for an inflatable. I was hoping in the Yukatat for boat that was a bit larger and looked more like a “real” kayak. Well, it does look nice. Fully inflated and sitting on the ground passers by ask all kinds of questions. Unfortunately, I have to tell them I’d recommend another boat – any boat.
4

I am downgrading my previous…

Submitted by: paddler231117 on 8/19/2005
I am downgrading my previous review. After having the kayak out on the water more than a dozen times, I noticed that more than half the time the kayak has a tendency to pull to one side or the other. I'm guessing this happens if the main tube is not lined up perfectly with the outer hull, but there is no way in which to check the alignment. This kayak needs a skeg, badly!

I also broke the zipper on the outer hull. Even though this was my own stupid fault trying to force the zipper closed, STEARNS replaced the whole kayak at no cost to me. That's why I'm rating this kayak as a 7 instead of a 5.

I strongly recommend buying the Advanced Elements Airfram if you are interested in this style of kayak. It is designed by the same people, but it has better valves and most importantly, it has a skeg!

I think I would have been happier with an inflatable sit-on-top.

4

The Stearns Yukatat is an…

Submitted by: paddler231117 on 6/8/2005
The Stearns Yukatat is an almost exact clone of the AirFrame by Advanced Elements. The Yukatat is a new design on the market for 2005 whereas the AirFrame has been on the market for several years and has become very popular. The similarity between the two is no coincidence. I talked to the designer at Stearns and he said that they were working on the design first, but that the two designers that worked for them left and started their own company which is Advanced Elements. I’m guessing they both share the copyright to the design.

I read through all the reviews for the AirFrame and they seem to match my experience with the Yukatat. Here are main differences I’ve noticed:

  • The Yukatat uses Boston Valves which are easy to use. The AirFrame use military-style valves.
  • The Yukatat has bungee tie-downs on the stern. The AirFrame does not.
  • You can unzip the bow of the AirFrame, but not on the Yukatat.
  • They both use aluminum inserts to make the bow and stern rigid, but the AirFrame use plastic bars for lateral support whereas the Yukatat uses vinyl sheets.
  • The AirFrame can supposedly handle class III rapids, but the designers at Stearns are much more conservative and recommend only using the Yukatat in calm water.
  • The seat is shorter on the Yukatat.
  • The AirFrame uses a plastic skeg to improve tracking. The Yukatat does not.
  • And of course, the Yukatat is yellow and the AirFrame comes in Orange or Blue.

    There is no spray skirt available for the Yukatat. The designer at Stearns said he has one made but the company chose not to put it on the market. I bought one that was made for the AirFrame and found it to be a perfect fit. I tried rolling over with it my pool, but the deck wasn’t rigid enough to keep it from coming undone.

    You have to be careful when setting up the kayak. You may have to readjust the inflatable tubes a few times as you’re inflating it to make sure they are centered within the outer hull, otherwise the boat will keep turning to one side. It helps if you put the floor in last. Also, the valves don’t always line up with the access holes in the shell, making them hard to get at.

    There were some complaints about the seat in the AirFrame sliding forward, and I had the same problem with the Yukatat. This problem was easily fixed by sewing a strap to each side of the seat to keep it at a 45 degree angle. I had some problems with the two buckles that clip the seat into the kayak; the strap would not stay adjusted to the length I wanted because it fit so loosely through the buckles. I was able to fix this by attaching some additional sliding buckles to the free ends or the straps to hold them in position. I also noticed that the aluminum frame inserts had sharp edges that needed filing down.

    I bought a 240cm Bending Branches Whisper paddle. I’m 6’ tall and this is a perfect size. I wouldn’t go smaller than 230cm since the sides of the kayak limit how close your hands can get to the water.

    Also, there is a misprint in almost every advertisement I’ve seen stating that the Yukatat is 12’4” long. The designer at Stearns verified the mistake and said the kayak was in fact only 10’4”.

    Overall, I am happy with my purchase. The Kayak tracks very well despite not having a skeg, and it is very stable. I’ve bottomed out dozens of times on a shallow river and there were no signs of wear. Best of all, it fits in an elevator and I can store it in my closet.

    If I had to choose over again, I’d probably buy the AirFrame instead just because it has been around longer and been through more testing and improvements. Feel free to contact me if anyone with an AirFrame lives in northeast Ohio and would like to go for a paddle to compare the two side by side.

  • B523 - Yukatat