Read reviews for the Guillemot by Guillemot Kayaks as submitted by your fellow paddlers. All of the reviews are created and written by paddlers like you, so be sure to submit your own review and be part of the community!
At about 40 pounds from cedar wood and fully outfitted, a Guillemot weighs less than most Kevlar kayaks. It is typically built from purchased plans or lofted from offsets included in the designer's book, "The Strip-built Kayak" by Nick Schade.
The boat rolls easily and the low decks produce almost no weathercocking tendency in cross-winds. No rudder or skeg is needed with this boat, but it clearly is a loose-tracking boat that may not be suitable for those that prefer strong tracking kayaks.
The plans and instructional book are clear, and the online message board at kayakforum.com provides many tips for builders. The plans include a full-size template of each mold station, making it easy to building an accurate mold. The carbon-paper tracing required by some other designers is eliminated with Guillemot plans.
An inch or two longer cockpit opening would be a good modification when building, as the standard keyhole cockpit may be too short for some to sit and then comfortably pull legs inside. First-time builders may have some trouble bending strips to conform to the mold near the stern, but perseverance will pay off with a properly-performing boat.
When starting from plans, the cost of construction when starting from plans can vary from approximately $500 to $1500 depending on choice and sources for materials, tools and supplies. Typical building time probably average between 200 and 300 hours, depending on how much time the builder spends learning about each step and just standing back and admiring the boat.
The boat receives many favorable comments from kayakers and non-kayakers alike, adding to the joy of owning this boat.